4.
Remote Configuration
User Manual VS-104D-3GSDI – V1.0
Page 23 of 39
5/2016
4.4 Event Configuration
Local
When a Decoder is connected to a Video Encoder, one system becomes a Local System
and the other a Remote System (generally a system which is being used by the user is
called as Local System). Event Actions can be configured from the Remote System as
well as the Local System. For Example: it is possible to turn on an alarm device in the
Local (center) Decoder System when a sensor device in Remote (site) Video Encoder is
triggered. The Local section configures the actions for the events from the Local (self)
System and the configuration activates the local devices and the Remote sections
configure the actions for events from Remote (peer) System.
The following table lists the possible actions for the events:
-
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a
single event.
-
On Disconnect
Configure the actions when the link (connection) with peer system is disconnected.
Multiple actions can be set for a single event. This event happens when the last client
which has been receiving video from the video encoder loses the connection.
