Marshall Electronics QV171-HDSDI, Руководство по эксплуатации

Страница: 23 / 28

23
On-Screen Menu (continued)
IMD CONFIGURATION SUBMENU (continued)
TSL/MEI 422
Use the TSL/MEI 422 setting to control OSD tally via the TSL or Marshall serial protocols.
■
IMD Baud Rate
Use this setting to choose the baud rate. The baud rate must be set in conjunction with the controlling device. Available
baud rates are
300 , 600 , 1200 , 2400 , 4800 , 9600 , 19200 , 38400 , 57600 , 115200 . The TSL v4.0 protocol is fixed at
38400 bauds.
■
IMD Name (S/N)
Use this setting to assign a name to each screen when using the Image Video or Marshall-IV protocols. The IMD name
is equivalent to the Image Video serial number and is used by the Image Video controlling device to identify
each screen.
The default IMD Name(S/N) is “M00000.” It is recommended to maintain this naming scheme in order to
avoid serial number conflicts with other Image Video devices on the same serial bus. Each name can be up to 16
ASCII characters.
Press RotoMenu
™
knob to edit the IMD Name. Rotate the RotoMenu
™
knob to move the cursor. Press the
RotoMenu
™
knob with the cursor on the character to be changed, then rotate the knob to scroll through the character
set . Press the RotoMenu
™
knob to choose a character.
■
IMD Tally Mode
Use this setting when using Image Video tally control. Choose one of the following settings, in conjunction with the
Image Video controlling device.
T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1- . Consult Image Video documentation for
further information.