M-Lynx-10W
LCD Monitor User Manual
Lynx
Lynx
www.LCDracks.com
Marshall Electronics
2
3
Thank you for purchasing our product. To enjoy all the features of this product
and keep it in good condition, please read this manual thoroughly and follow the
instructions herein accordingly.
1. No parts of this product can be repaired by the user himself. In case
of faults, shut off the power immediately and consult us or our dealers.
As this product is made of precise electronics components, unauthorized
detachment or reassembly may damage it.
2. Do not expose this device to moisture, dirt, smoke, vapor or direct sunshine.
3. Unplug the monitor from the wall outlet before cleaning. Do not use
thinner or other chemical cleaner to clean this device.
Please use only a soft, damp cloth.
4. Keep the monitor far from extremely hot or cold places.
The storage temperature of this device is -20°C -+ 70°C
5. Avoid dropping or bumping this device.
6. Slots and openings in the monitor’s cabinet are provided for ventilation
and ensure reliable operation of the monitor and to protect it from
over-heating. These openings must never be blocked. The monitor
should never be placed near or over a radiator or head register. This
monitor should not be placed or built in to a rack or bookshelf unless
proper ventilation is provided and supplier instructions have been
adhered to.
7. Do not attempt to repair this monitor yourself by opening or removing
covers. This may expose you to dangerous voltage or other hazards.
Refer to a qualified service technician if servicing is necessary. If monitor
is opened by anyone other than a factory authorized service center, the
warranty is voided. If serial number is removed or tampered with, the
warranty is voided.
8. When part replacement is required, make sure it is performed by a
qualified technician and that the parts are supported by the manufacturer.
M-Lynx-10W SpecificationS
• We strongly recommend having a qualified technician or maintenance
engineer install this device.
• When connecting to the computer, set up the monitor to VGA input,
800 x 600 or 1024 x 600 (60Hz). Apply same settings to computer.
• When connecting to HDMI, set up the monitor to be HDMI input.
• Improper installation of this monitor may cause battery
leakage or short circuit.
When environmental temperature declines dramatically, dew may occur
inside the monitor. Wait for the moisture to evaporate. Then the device will
return to normal working condition.
if you have any questions about this device, please consult your
dealer.
inStaLLation
MoiStURe
type:
TFT LCD Digital Panel
Screen size:
10-inch
Definition:
1024 (h) x RGB x 600 (v)
computer Resolution:
800 x 600 or 1024 x 600 (60Hz)
inputs:
HDMI, VGA, Composite
System:
NTSC/PAL
nominal Voltage:
12V
power consumption:
5W MAX
control:
Front panel button/Remote control
operating environment:
-10ºC - +60ºC
