www.lcdracks.com
15
IR TRANSFER (IR PASS)
UVC CONTROL
1. Currently the camera support NEC code format. For customization with other codes, please contact us.
2. Once the camera finish power configuration, enable the IR transfer function via sending COM command.
3. Get the targeted remote controller point to the camera IR receiver, press keys on the remote controller,
then the camera will output the received IR code via VISCA IN port.
4. IR Transfer output format: XX XX XX XX FF
5. The camera can save all setting, no need to re-set after power circle.
XX XX XX XX: Remote Controller Code FF: End Code
Control Requests
Control Selector
1 Brightness Control
PU_BRIGHTNESS_CONTROL
2 Contrast Control
PU_CONTRAST_CONTROL
3 Hue Control
PU_HUE_CONTROL
4 Saturation Control
PU_SATURATION_CONTROL
5 Sharpness Control
PU_SHARPNESS_CONTROL
6 Gamma Control
PU_GAMMA_CONTROL
7 White Balance Temperature Control
PU_WHITE_BALANCE_TEMPERATURE_CONTROL
8 Gain Control
PU_GAIN_CONTROL
9 Power Line Frequency Control
PU_POWER_LINE_FREQUENCY_CONTROL
10
Zoom (Absolute) Control
CT_ZOOM_ABSOLUTE_CONTROL
11
Zoom (Relative) Control
CT_ZOOM_RELATIVE_CONTROL
12 PanTilt (Absolute) Control
CT_PANTILT_ABSOLUTE_CONTROL
13 PanTilt (Relative) Control
CT_PANTILT_RELATIVE_CONTROL
IR Transfer (IR PASS)
