Design and specifications are subject to change without notice.
Marshall Electronics
HD-SDI 1080p Camera Setup: CV505-M, CV505-MB
SETUP
SUB MENU
SUB MENU
DESCRIPTION
ESC
IRIS is
fi
xed. Shu er controls exposure automa cally if shu er is set as auto.
DC IRIS
Controls exposure automa cally.
AUTO
Color temperature is automa cally adjusted to 3,000°K ~ 8,000°K
ATW
Con nuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within
the range of 1,900K to 11,000K.
PUSH
Color temperature will be manually adjusted by pushing the OSD bu on. Place the white paper in front of the camera when OSD bu on is pressed to
obtain the op mum result.
COLOR TEMPERATURE
Select color temperature from LOW, MIDDLE, or HIGH.
RED GAIN
Adjust the Red tone level manually. Adjust the red tone of the image (0~20).
BLUE GAIN
Adjust the Blue tone level manually. Adjust the Blue tone of the image (0~20).
BRIGHTNESS
0~20
Adjust the screen brightness. The bright control func on adjusts gain and iris, to keep a brightness level.
AGC LIMIT
0~20
A func on which controls the ampli
fi
ca on/gain process automa cally if the illumina on falls under the usable level. Camera raises up gain to
selected gain limit when dark condi ons.
AUTO
Shu er controls exposure automa cally when IRIS is manual. Shu er control has the exposure control priority
MANUAL
Shu er speed is
fi
xed. The exposure control priority is given to other resources.
FLICKERLESS
Use this func on when you experience picture
fl
icker, this happens when there is a con
fl
ict with the installed ligh ng frequency.
DSS (SENS-UP)
OFF, x2~64
When luminance condi on is low, DSS can adjust the picture quality by maintaining the light level. Minimum slow shu er limit is down to x64.
WDR
Enable user to view both object and background more clearly when background is too bright. (LOW, MIDDLE, HIGH).
BLC
Enable a back light compensa on feature.
SPOT
Enables a user to select a desired area on a picture and view that area more clearly when background is too bright.
ACE
LOW, MIDDLE, HIGH
Brightness correc on of the dark image area.
LEVEL
Highlight the bright area with a masking box with a selected color. Adjust the masking level (0~20).
COLOR
Select the color for masking (GRN, MAG, RED, BLUE, BLK, WHT, YEL, CYN)
ANTI-SAT.
Adjust the an -satura on level manually. This feature will reduce the satura on phenomenon in which part of the camera receiving the light a
ff
ected
by the IR or light in Night mode.
AGC LEVEL
The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illumina on become this pre-set level.
This level is threshold for switching day to night. It is same as the exposure gain level.
AGC MARGIN
Set the margin between Day
→
Night switching level and Night
→
Day switching level.
DWELL TIME
Select the checking me of light condi on to con
fi
rm to chage from the day mode to the night mode.
COLOR
The camera keeps color mode constantly.
NIGHT
The camera keeps black/white mode constantly.
RANGE
10%, 20%, 30%
This func on will reduce image blurriness due to vibra ons caused by hand shake or Pan/Tilt opera on.
The image will be digitally zoomed in to compensate the shi ed pixels.Set the digital zoom level for image stabilizing. (Max. 30% : x1.4 Digital Zoom)
FILTER
LOW, MIDDLE, HIGH
Select the level of correc on hold
fi
lter for the worst case of image. HIGH: Less image correc on. Low: More image correc on.
AUTO C
OFF, HALF, FULL
OFF: Disable the auto centering func on.
FULL: The camera will correct the blurness due to vibra ons caused by both hand shake or Pan/Tilt opera on.
HALF: The camera will correct the blurness due to vibra ons caused by hand shake.
AUDIO LEVEL
0~143
Enabled when AUDIO AGC is set OFF. Adjust the audio level manually.
AUDIO AGC
OFF, ON
Automa cally adjusts the MIC gain as the input signal becomes overly loud or very weak.
AGC MAX
0~119
Enabled when AUDIO AGC is set ON. Set the maximum level of AUDIO AGC.
SAMPLE BITS
16, 20, 24, 32 BITS
Select the bit depth of audio.
COLOR LEVEL
0~20
Adjust the color level value for a
fi
ne color tune.
SHARPNESS
0~20
Adjust the sharpness of the image. As you increase this value, the picture outline becomes stronger and clearer.
MIRROR
Video output is rotated horizontally.
FLIP
Video output is rotated ver cally.
D-ZOOM
1.0X ~ 16.0X
Enlarge digitally the video output up to 16X.
AUTO
This feature will help increase visibility in extreme weather condi ons, such as fog, rain or in a very strong luminous intensity.
MANUAL
Set the level of defoging func on (LOW, MIDDLE, HIGH).
DNR
OFF, LOW, MIDDLE, HIGH
This feature will reduce the video noise at low ambient light.
MOTION
This feature will observe the object movement by mo on zone and sensi vity that are pre-set with sub menu.
SHADING
This feature will correct the inconsistent brightness level in the image.
GAMMA
This feature will adjust video output brightness (STANDARD, STRAIGHT, LOW, MIDDLE, HIGH).
FRAME RATE
Change video output format.
CAM VERSION
Display the
fi
rmware version of the camera.
CAM TITLE
The camera tle can be entered and it will appear over the video output.
PRIVACY
Mask an area you want to hide on the screen with sub menu.
CAM ID
0~255
Select the camera ID number for RS-485 communica on.
BAUDRATE
Set the baudrate of RS-485 communica on (2400, 4800, 9600, 19200, 38400, 57600, 115200).
LANGUAGE
Select the menu language.
RESET
Reset the camera se ngs to the factory defaults.
EXIT
Exit the setup.
DAY/NIGHT
AUTO
IMAGE
STABILIZER
IMAGE
CONTROL
DEFOG
DISPLAY
CONTROL
AUDIO
LENS
WB
CONTROL
MANUAL
AE CONTROL
(EXPOSURE)
SHUTTER
BACK LIGHT
BACK LIGHT
ECLIPSE
