1. Unpack the BC-0909-AD and accompanying V-PS6-1.2A power supply. Physically inspect for any damage that may have occurred during ship-
ping. Also verify there is a small package with mounting accessories. Should there be any damage, immediately contact Marshall Electronics at
800-800-6608. If you are not located within the continental united states call +1 310-333-0606.
2. Install in your desired location. If wall mounting is required, attach the mounting brackets by removing the Phillips head screws on the sides,
closest to the rear of the unit. (See Below) Only one screw per side should be removed.
Use the same screw to attach the bracket with the flange facing away from the side and parallel to the front of the BC-0909-AD metal case. The
flange has two holes. For desktop use, apply the supplied rubber pads.
3. Connect required cables for signal input and output.
Please note that power must be applied to the BC-0909-AD
for the HDSDI/SDI outputs to be activated. All BNC connectors
should be rated for 75Ω.
3. Plug the V-PS6-1.2A power supply into the A.C. source
4. Attach twist lock power connection from V-PS6-1.2A
power supply to the back of the unit.
5. Turn on the BC-0909-AD by depressing the power
switch located on the front of the unit.
Refer to section 6 picture for location of switch settings.
Operational Setup
7
7
1910 East Maple Ave. El Segundo, CA 90245 • Tel.: 800-800-6608 • Fax:310-333-0688 • www.LCDRacks.com • Email: [email protected]
BC-0909-AD Universal Digital Converter Users Guide
7
11
Warranty
Marshall Electronics warranties to the first consumer, that this BC-0909-AD Digital to Analog Converter will, under normal use be free from defects in workmanship and
materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a
warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction,
voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the
duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
HD-15
BNC Breakout
Red
Green
Blue
Ground
Ground
Ground
Switch Settings & Indicators
7
9
Power On/Off indicator
Bracket Installation
Feet Installation
7
8
Input Connectors
Signal
Type
HD Analog
color difference
YPbPr
SD Analog color
difference
Y, R-Y, B-Y
S-Video
Y/C
Pin1
Pr
R-Y
C
Pin2
Y
Y
Y
Pin3
Pb
B-Y
Pin4
Pin5
Pin6
Ground
Ground
Ground
Pin7
Ground
Ground
Ground
Pin8
Ground
Ground
Pin9
Table 1
Analog Signals Input
See Table 1
HDSDI or SDI out
Composite Input
6 VDC from
V-PS6-1.2A
power supply
Left Pin - Pos
Right Pin- Neg
Input Signal Format
Custom - not available
Composite Auto - Composite NTSC/PAL input, SDI output
S-Video Auto - S-Video (YC) NTSC/PAL input, SDI output
YPrPb Auto - Analog component HD input (1080i, 1080p, or 720p), HDSDI output
525i:60 - Analog component NTSC input, SDI output
625i:50 - Analog component PAL input, SDI output
720p:60 - Analog component 720p 60Hz input, HDSDI output
720p:50 - Analog component 720p 50Hz input, HDSDI output
720p:30 - Analog component 720p 30Hz input, HDSDI output
720p:25 - Analog component 720p 25Hz input, HDSDI output
Input Signal Format
7
10
1080i:60 - Analog component 1080i 60Hz input, HDSDI output
1080i:50 - Analog component 1080i 50Hz input, HDSDI output
1080PsF - Analog component 1080PsF 24Hz input, HDSDI output
1080p:30 - Analog component 1080p 30Hz input, HDSDI output
1080p:25 - Analog component 1080p 25Hz input, HDSDI output
1080p:24 - Analog component 1080p 24Hz input, HDSDI output
07/13/2006
