6
Quick Start Guide
1. Connect an Audio Source
Connect an audio source to one pair of the rear panel input connectors. We recommend the use of the Balanced XLR
female connectors using a balanced audio signal with a nominal level of +4dBu.
2. Power On the Audio Monitor
Supply power to the audio monitor by connecting the included power supply to an AC power source (100-240 V @
50/60 Hz) and connecting the power supply’s 4-pin XLR connector to the back of the audio monitor. The Power LED
on the front panel will illuminate green.
3. Adjust the Volume and Balance
Use the Volume and Balance controls to adjust the sound level and stereo balance.
7
Front Panel Features
Stereo Loudspeakers
The stereo loudspeakers are always active
regardless of connected headphones.
Power Indication LED
The power LED will illuminate green when power is
supplied to the audio monitor.
Headphone Output
The headphone output accepts stereo headphones
with a 1/4" TRS connecter.
Headphone Volume Control
The headphone volume control affects only the stereo
headphone jack.
Master Volume Control
The master volume control affects only the stereo
speakers.
Balance Control
The balance control adjusts the relative level of each
left and right input to the speakers and headphones.
