Marshall Amplification ROCKET LP, Руководство пользователя

Страница: 8 / 40

8
Removing the transit retaining bolts and foam.
• Unlock the front of the Jukebox and raise the front glass to its highest position.
The gas struts will hold the weight of the front glass.
• Look downwards into the mechanism and you will see the 2 x 10mm retaining
bolts as denoted in FIG 2 and a section of retaining foam underneath the
mechanism arm.
• Remove the retaining foam from beneath the mechanism arm. (shown in FIG 2.)
Gently pull this foam to the right (towards the record stack) to remove it.
• Using a 10mm spanner or socket screwdriver, carefully remove the retaining
bolts and the wooden blocks avoiding any contact with the LP Changer Arm.
• The Lower section of the mechanism is now ready.
• Looking at the play area of the Jukebox (shown in FIG 3) - Carefully remove
the clear plastic bag containing the Anti Skate weight and retain it to install
(see Anti Skate weight section) Then, carefully remove the transit plate retaining
screws with a suitable screwdriver. The transit plate is now able to be lifted from
the playing platter and tone arm. It is important to remove the plate by lifting
directly UP so as not to damage the tone arm. The plate should be kept safe for
use if the jukebox is to be moved in the future.
• Remove the retaining foam from under the tone arm.
• Switch the Jukebox on using the power switch on the rear of the Jukebox
denoted in FIG 1. The Jukebox will illuminate. Transit will show on the front
display denoting that the Jukebox is in Transit mode.
• Press the white RESET button on the back of the Jukebox. (FIG 1) to exit transit
mode. The mechanism will return to its home position with the LP changer arm at
the top.
• Remove the clear plastic stylus cover (shown in FIG 3) by sliding it towards you.
• The Jukebox is now ready to play.