OWNER’S MANUAL
MODEL DH5-4444DMK – HEATED HOLDING UNIT
165037 RV113018
Copyright © 2014 Marshall Air Systems, Inc.
All Rights Reserved.
DH5-4444DMK
Supplier Name:
MARSHALL AIR SYSTEMS, INC.
Address:
419 Peachtree Drive South
Charlotte, NC 28217
Model #’s: _____________________________
Serial #’s:
_____________________________
Date Received: _____________________________
Date Installed: _____________________________
Telephone #:
704.525.6230
Fax #:
704.525.6229
Service Referral #: 800.722.3474
Local Service Name:____________________________
Local Service #: ____________________________
PRODUCT DESCRIPTION
This Heated Holding Unit features Marshall’s own
ThermoGlo
heating technology. Heat radiates from
every square inch of the upper and lower flat plate
heating surfaces. This eliminates the need to clean
intricate calrod, wire and reflector assemblies.
The DH5-4444DMK Heated Holding Units
accommodates up to three 1/3 size pans 2 1/2" deep,
two 1/2 sheet pans, one full pan or one 1/2 sheet pan
per deck.
The unit is controlled by four independent integrated
time/temperature controllers located on the front of the
heated holding cabinet. The controls determine the
intensity of top and bottom heaters. The integrated
time/temperature controllers also feature 3 independent
countdown timers to help maintain product integrity. An
On/Off switch for each deck is easily accessible to the
store personnel allowing them to turn ON and OFF any
desired deck. The Heated Holding Unit offers the latest
in technological design which gives you the most
favorable holding characteristics in a system that is
simple to work with and operate.
GENERAL SPECIFICATIONS
Model: DH5-4444DMK
Height: 30.125”
Width: 22.375”
Depth: 14.500”
Electrical: 380/220V
3PH WYE - L1: 2.9A, L2: 2.9A, L3: 3.9A,
N:
3.9A
1PH W/ Neutral – L1: 4.8A, L2: 4.8A,
N: 4.8A
Weight: 85
lbs
Approvals:
NSF, ETL/CETL and CE
Содержание DH5-4444DMK
Страница 4: ......
