OWNER’S MANUAL
MODEL DH1-1010 SERIES – HEATED HOLDING UNIT
174830 RV120817
Copyright © 2017 Marshall Air Systems, Inc.
All Rights Reserved.
9
REPLACEMENT PARTS
502064 - Sensor, RTD, 48"
Used to read heater's temperature. If a RTD
sensor goes bad or is disconnected, its
associated controller will beep and the display will
flash either "oPn" or "SHt" to indicate failure
502425 - Switch, Double Pole
A bad switch could cause the associated
controllers to not turn on. Bad or damaged switch
should be replaced immediately.
Part Replacement Time: 10 min
Part Replacement Time
Upper Platen: 21 min
Lower Platen: 27 min