CV420-30X-IP Manual
www.marshall-usa.com
9
10
4. Network Function Settings
4.1 Web System Requirements
4.1.1 Web Browser:
• Internet Explorer 11 or above
• FireFox 66.0.3 or above
• Chrome 73 or above
• Edge 42.17134 or above
• Safari 12.1 or above
4.2 Connecting Camera to Network
4.2.1 Connecting to Internet
Two common connection methods are shown below
1. Connecting via switch or router
2. If the camera is connected to the computer directly, the computer IP address must be
modified to have the same network segment as the camera
For example, the factory-preset default IP address of CV420-30X-IP is 192.168.100.100. The
computer IP address must be set with the same subnet, such as 192.168.100.101, so that the
computer can be connected correctly with the camera
• Connection Diagram
• Change network settings
4.2.2 Using Marshall VMS Software to View the Images
• The CV420-30X-IP DHCP initial setting is ON. If it is connected to the local area network (LAN),
the camera IP can be retrieved via the following methods
• Install Marshall VMS software (Please download from the Marshall official website, www.
marshall-usa.com)
• Open Marshall VMS software
• Search for the camera: Press [automatically search for the device] button to locate the
CV420-30X-IP camera
• Click CV420-30X-IP in the list and start operation after connecting to network
Note: When using automatic search, the camera and computer must be in the same network
segment, e.g.: 192.168.4.X
