Marshall Amplification Broadcast & Pro AV CV-PT-HEAD, Инструкции

Страница: 5 / 5

Camera Specific Connections
CV-PT-HEAD comes with a Lemo (base) to Hirose (camera) cable for
Marshall cameras. The table below is used if a Male connector is fitted
on the camera. ie. if the connector on the camera itself has pins – like
in the picture.
Marshall Cameras
Hard wired cable assembly into camera
Core Colour Function Lemo 7 pin No. Hirose pin No. Normal Colour
Screen (around Yellow)
Power GND 1
8 Blue
Orange
Data A 2
6 Green
Grey
Data B 3
5 Yellow
Red
Power 12v 4
9 Red
5
no connection
6
no connection
7
no connection
White
3.3v for Menu
control Insulate
Yellow
Menu Control
Insulate
Black
SDI co-ax
Not all the functions built into controller are actionable by all the types of cameras. The controls to which
Marshall CV500-series cameras will respond are as follows.

Zoom – if a motorised zoom is fitted

Focus – if a motorised focus is fitted

Iris - if a motorised Iris is fitted

Auto Iris

IR Mode

Camera Gain -3dB – 30dB

Shutter Speed

Auto Push White

Full Auto Tracing White

Preset White 3,200K & 5,600K

Manual White Balance

Red Gain

Blue Gain

Cam Detail

Cam Gamma

Output Standard - 1080i & 1080p in 50Hz & 60Hz frame rates.

Picture Flip

Cam DNR
(310) 333-06060 Marshall Electronics support@marshall-usa.com