marsden MBF-6000, Руководство пользователя, Страница: 21 / 29

EMC Guidance and Manufacturer ’ s Declaration
Guidance and manufacturer’s declaration-electromagnetic emissions
The MEDICAL SCALE MBF-6000/6010 is intended for use in the electromagnetic environment
specified below.
The customer or the user of the MEDICAL SCALE MBF-6000/6010 should assure that it is used in
such an environment.
Emission test Compliance
Electromagnetic environment-
guidance
RF emissions CISPR 11 Group 1 The MEDICAL SCALE MBF-6000/6010
uses RF energy only for its internal
function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic
equipment.
RF emissions CISPR 11
Class B The MEDICAL SCALE MBF-6000/6010 is
suitable for use in all establishments,
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
Harmonic emissions IEC 61000-
3-2
Class A
Voltage fluctuations /flicker
emissions IEC 61000-3-3 Compliance
Guidance and manufacturer’s declaration -electromagnetic immunity
The MEDICAL SCALE MBF-6000/6010 is intended for use in the electromagnetic environment
specified below.
The customer or the user of the MEDICAL SCALE MBF-6000/6010 should assure that it is used in
such an environment.
Immunity test IEC 60601 test level Compliance level
Electromagnetic
environment-guidance
Electrostatic
discharge(ESD)
IEC 61000-4-2 ± 8 kV contact
± 2 kV, ± 4 kV, ± 8
kV, ± 15 kV air ± 6 kV contact
± 8 kV air Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should be at
least 30%
Electrical fast
transient/burst IEC
61000-4-4 ± 2kV for power
supply lines + 1kV
for input/output
lines ± 2kV for power
supply lines Not
applicable Mains power quality should
be that of a typical
commercial or hospital
environment.
Surge IEC 61000-4-
5 ± 1kV line(s) to
line(s) ± 2kV line(s)
to earth ± 1kV differential
mode Not
applicable Mains power quality should
be that of a typical
commercial or hospital
environment.
Page 20