26
OPERATION USING PLU(S)
1. ADD OR EDIT PLU
1.1 With the scale in the Weight mode, press the PGM key. The
Weight display will change to show
.
1.2 Touch the P1 through 9 key or using the numeric keys, enter
the desired number of PLU 10 through 99 to change and press
the ENTER key. The PLU number will be shown on the Weight
display.
1.3 Using the numeric keypad to enter the average piece weight
and then press the ENTER key to accept it. Note that if the PLU
currently has an average piece weight, you can press the
ENTER key to accept it or change it at this time.
1.4 The PIECES display will change to show
.
1.5 Press the ENTER key to accept it.
1.6 The next sequential PLU number will be displayed. Repeat
steps 2 through 5 to program the remaining PLU’s.
1.7 To exit PLU programming, simply press the PGM key and the
scale will return to the normal weight mode.
2. PLU Operation Using Numeric Keypad
2.1 With the scale in the Weight mode, press the P# key. The
Weight display will change to show
.
2.2 Enter the desired PLU number (1 through 99) and press the
ENTER key.
2.3 The recalled PLU and average piece weight will display along
with the associated tare weight (if a tare weight was
programmed).
