22201302
Page 3 of 6
Rev. A
Figure 3
5.
Assemble the upper and lower Mars adaptor brackets to the OBA-2 Mounting Bracket as shown in
Figure 3 using the nuts removed in Step 4. See Figure 3.
6.
Mount your Mars Acceptor onto the bracket using the 4 nuts provided. To provide the smoothest opera
tion, push the Acceptor as far as possible
away
from the bracket as you tighten the unit to the brackets.
7.
Install the new trim plate supplied with your JUMP Kit using the 4 philips screws removed in Step 3.
See Figure 4.
Figure 4
Push the Mars Acceptor in
this direction as you tighten
in place
Lower Bracket
Upper Bracket
OBA-2 Mounting
Bracket
