INSTALLING THE ARRAY FRAME
The array frame is attached to the internal rigging of the MG system using the provided Quick Release Pins
WARNING:
Do not use any substitute for these pins.
1. Begin by attaching the two side arms (A) to either side of the center frame. Use a pair of the provided Quick
Release Pins (B)* to attach the arms to the frame. Note: Side arms should be attached
with the rubber bumper facing up and away from the center
frame. The center frame is installed with the rubber gasket
toward the enclosure and the label right side up. [Note: The
arms of the MG-AF are deliberately designed so as not to
be interchangeable. The arms of the MG-SMAF are already
attached. ]
2. Place the entire array frame on top of the MG system
and flip up the drop levers (C) found on both sides of the
speaker to be received by the array frame arms.
3. Once the drop levers on the speaker are received by the
array frame, use a pair of the provided Quick Release Pins
(D) to attach the drop levers to the array frame.
*(B) does not apply to MG-SMAF
MAXIMUM ARRAY SIZE
MG-AF Array Frame
Maximum number of MG1918S in array
6
5
4
3
2
1
0
Maximum number of MG1932 in array
0
1
2
3
4
5
6
MG-SMAF Array Frame
MG-AF ARRAY FRAME
The following table defines the maximum number of speakers that may be suspended using the MG-AF frame. A
minimum design factor of 7:1 is maintained for all speaker configurations at or below those indicated in the table.
MG-SMAF ARRAY FRAME
The following table defines the maximum number of speakers that may be suspended using the MG-SMAF
array frame. A minimum design factor of 7:1 is maintained for all speaker configurations at or below those
indicated in the table.
The MG subwoofers must always be on top of the array.
Maximum number of MG1915S in array
4
3
2
2
2
0
Maximum number of MG1928 in array
0
2
3
4
5
6
19
(A)
(D)
(A)
(B)*
(C)
(D)
There are two variations of the MG array frame. The MG-AF is for suspension of MG1918S and MG1932. The
MG-SMAF is solely intended for use with the MG1928 and MG1915S. Before suspending an MG array, determine
which version of the array frame you have and consult the table below to determine the maximum number of
speakers that may be safely suspended. The subwoofers must always be at the top of the array.
Содержание M G - A F
Страница 2: ...2...
Страница 24: ...Part Number 5069690 03 2016 JBL Professional 8500 Balboa Blvd Northridge CA 91329 USA...
