A
B
C
B
C
D
G
WICKER BAR TABLE
E
F
G
Step 1
S
tep 2
A S S E M B L Y I N S T R U C T I O N S
Turn over the table top frame on to a clean protected surface.Use screws and
washers(G) to fit the legs(B) and (C) to the table top(A). Loosely tighten screws
bar (D) to the table legs (C&B),
allen key (H). When all screws are in position
Carefully turn over your table and attach the center support bar (E) to the cross
support bar (D), using screws and washers (G) and allen key(H).Once all screws
securely, then cap the screws.Carefully place the glass
table top into the bar table. Your setting is now ready for use.
using allen key(H). Then attach the cross support
using screws and washers(G) and
tighten securely using the Allen Key (H). Add the screw caps to each screw head.
are in position, tighten
