Marquant TR-231 DAB, Инструкция по эксплуатации

Страница: 4 / 5

DAB / FM radio stations preset:
You can store the frequencies of up to 10 radio stations in the memory. A stored
frequency can be erased from the memory by storing another frequency in its
place.
1. In DAB or FM mode, tune to your desired station.
2. Hold PRESET until the display Preset Empty with flashing 1-10 (1-10 is the
preset position number)
If the preset number is empty, “Preset Empty” is shown.
If the position is saved with station, station frequency is shown.
3. Rotate PREVIOUS ( ) or NEXT ( ) to select the desired memory location.
4. Press ENTER once to confirm and save the selected station.
5. To listen to a preset station:
• Press
PRESET once,
• Rotate
PREVIOUS ( ) or NEXT ( ) for selecting your desired station.
SETTING THE ALARM
1.
In standby mode
2. Press ALARM , to select Alarm 1 / Alarm 2 (ON / OFF is flashing)
3. Rotate PREVIOUS ( ) or NEXT ( ) to change between OFF and ON. Press
ENTER to confirm.
4. To set the hours, Rotate PREVIOUS ( ) or NEXT ( ) while the display is still
flashing. Press ENTER to minute setting.
5. To set the minutes, Rotate PREVIOUS ( ) or NEXT ( ) while the display is
still flashing. Press ENTER to confirm.
6. Alarm Mode: Daily, Once, Weekends (Saturday / Sunday, Weekdays (Monday
to Friday), is flashing. Rotate PREVIOUS ( ) or NEXT ( ) to select desired
alarm mode and press ENTER to confirm.
7. Alarm Type: Beeper1, FM, DAB, Beeper2 is flashing. Rotate PREVIOUS ( ) or
NEXT ( ) to select desired alarm type and press ENTER to confirm.
8. Alarm volume is flashing, rotate PREVIOUS ( ) or NEXT ( ) to select desired
alarm volume and press ENTER to confirm to save the setting and exit.
SNOOZE FUNCTION
1.
When your alarm rings, you can press the ENTER to temporarily suspend the
alarm. The alarm will ring again at 6 minutes later. (The Snooze interval time is 6
minutes).
2. Snooze will be repeated until the ALARM / POWER is pressed.
Factory Reset
In DAB or FM mode, press and hold INFO/MENU, then rotate PREVIOUS ( ) or
NEXT ( ) and ENTER
to enter “Factory Reset” and see “No” or “Yes”. Rotate
PREVIOUS ( ) or NEXT ( )
to “Yes” and press
ENTER to confirm, then the unit
will be reset to original setting.