EN
20
1.
Place the foot massager in front of your chair and insert the plug in the power socket. Wear
socks (do not use shoes) when using the foot massager. Always sit down when using the foot
massager. Never stand on the product.
2.
The power switch controls all functions. Press the power switch once to start the massager.
A blue light comes on.
3.
Press the power switch again to activate the heating function and massage (while the
massage function is still working). The light now turns red. It takes a short time for the
foot massager to heat up.
4.
Turn off the massager by pressing the power switch a third time. Then pull out the plug.
Always unplug the product when it is not being used.
TIP!
• Vary the intensity of the massage by putting different pressure on the massager with your feet.
• Press your feet down more on the massage surface if they tickle or wait a moment to allow your
feet to get used to this feeling.
• Reduce the pressure on the massage surface if the massage is too intense.
MAINTENANCE
STORAGE
• The product must be stored in a cool, dry place and in its original packaging.
• Protect the product and cord from sharp, pointed objects that can damage the surface.
• Do not wind the cord around the product.
• Do not carry or pull the product by its cord.
CLEANING
Note!
• Do not expose the product to water or other liquids.
• Never use abrasive cleaning agents, brushes or chemicals (flammable or not) for cleaning.
• Do not attempt to dismantle or repair the product. This product does not contain any parts that
can be repaired by the user.
1.
Pull out the plug and allow the product to cool down before cleaning.
2.
Clean with a soft, slightly moist sponge.
