EN
40
FM radio mode
NOTE:
Pull out the FM wire aerial on the back of the speaker for best radio reception.
1.
Press the MODE button on the speaker or remote control to activate FM RADIO mode.
2.
Press the FM SCAN button on the remote control. Up to 20 stations are stored automatically.
NOTE: If the FM SCAN button is pressed again the stored stations will be deleted from the speaker.
3.
When the FM search is finished, press the CH+ or CH- buttons on the remote control to select
a preset station.
4.
Press the
button on the speaker or the button on the remote control to switch off
the sound.
TROUBLESHOOTING
The Bluetooth unit will not pair with the speaker.
• Check that the speaker is on before starting the synchronisation.
• Place the speaker and Bluetooth unit within 1 metre of each other during the synchronisation.
• Press the MODE button on the speaker or remote control to enable Bluetooth mode. An audio
prompt will be heard and BL flashes on the LED display to show that the speaker is in Bluetooth
synchronisation mode.
• Check that Bluetooth is enabled on the unit.
• Repeat the synchronisation according to the instructions.
The Bluetooth unit can be synchronised with the speaker, but no music can be heard.
• Check that the Bluetooth unit supports the profile A2DP.
• Increase the volume on the Bluetooth unit.
• Interrupt the synchronisation and re-pair the units again.
Synchronisation mode cannot be enabled on the speaker.
• Check that the speaker is on before starting the pairing.
• Press the MODE button on the speaker or remote control to enable Bluetooth mode. An audio
prompt will be heard and BL flashes on the LED display to show that the speaker is in Bluetooth
synchronisation mode.