Marport Trawl Explorer, Руководство по обслуживанию

Страница: 27 / 94

Trawl Explorer | V5 | Sensor Configuration
5.
Click Apply and make sure there is a green check mark .
Changing the Transducer and End Cap Orientation
For V1 version of the sensor, you need to change the orientation of the transducer and
end cap of the sensor to correctly receive pitch and roll data.
Changing the Transducer Orientation
Before you begin
For this task you need the following tools:
Allen keys:
1.5 mm, 1/8"
Needle
nose pliers
Silicon glue O-ring
lubricant
(Molykote
55 o-ring
grease)
About this task
Only qualified Marport technicians can do this task.
Procedure
1. Disconnect components.
| 26