Marport Scala2, Руководство пользователя

Страница: 34 / 177

Scala2 | Version 5 | System Configuration
Calculations for Positioning System
When configuring the positioning system on the system web page (Scala2 receiver page), you
must consider the position of the hydrophones. When they are misaligned, you can calculate their
misalignment angles with the following calculations.
Tip: A spreadsheet is available on Marport support website to help you complete this page:
go to the Useful Resources page.
Note: Baseline length is the distance between two hydrophones. It must be in meters.
Receiver firmware below version 08.01: There are two misalignment angles that you should
calculate. Misalignment Z is the more critical for correct positioning data. Make sure these
calculations are correct if you enter them in Scala2.
Receiver firmware from version 08.01: Calculate misalignment Z only.
The drawings below show the misalignment angles and how to calculate them:
Misalignment X (angular offset around X axis) Misalignment Z (angular offset around Z axis)
Sign of Angles
Once you have calculated X and Z misalignment angles from the above formulas, you need to add a
positive or negative sign to the result. The sign depends on the offset of the hydrophones. Refer to
the drawings below to know if you need to add a negative or positive sign to misalignment Z and X.
The sign of the angles is important to receive correct positioning data.
Misalignment Z (view from above)
| 33