3
Dock
| Quick Reference Guide | V2
Overview of the Virtual Charger Room
Node identifying the location of the sensor on the trawl.
Name of the application.
If any, number of spare sensors.
Charging level.
Access to the settings.
Remaining lifetime at the current state of charge.
Sensor status
Open Scala2 application, then click Menu
> Virtual Charger Room.
The sensor is connected to the
Dock and charging. It displays
Ready to deploy when fully
charged.
Click
>
to display a
visual animation on the charger
plug when the sensor must be
deployed.
The sensor is operating on the
trawl.
The sensor is out of water and is
not connected to the Dock.
Interface with Mosa2
Dock connected by Ethernet
to the vessel’s network.
: Click to make the LED
strip above the Ethernet
connector flash blue for 30
seconds.
Sensor connected to the
Dock with a charger plug.
: click to show the
deploy animation on the
charger plug for 30 seconds.
Click Menu
> Expert Mode to
display the Dock on the discovery
page.
7
6
5
4
3
2
1
1
2
