4
4.
Time and date are automatically switch mode, And it
will switch for every 10s
5.
MAX
display maximum value during measuring
6.
MIN
display minimum value during measuring
7.
REC
this sign showing that the data logger is under
recording
8.
FULL
this sign showing that the memorizer is full, the
data logger will stop recording
9.
%RH
this sign showing that the data logger is
measuring humidity
10. °C
Centigrade
11. °F Fahrenheit
12. When press the MAX/MIN button,it will hold MAX,MIN,
time and date.The time and date is also switched for
every 10s.If you don not press any key in 40s,the meter
will automatically exit from the MAX MIN mode,and
return to the the data hold and measure mode.
13. When loading the data, there will be “-PC-” sign
displayed on the LCD. After all the data are loaded, the
data logger will display the real value from current
measurement. But it will stop recording. The logger
need to be re-set if you need the recording function.
You can only look over the data from the logger itself.
All settings will be only carried through the software
installed in PC.
14
．
Alarm function
When the measured value exceeds the set upper limit
or lower limit, the alarm LED will wink one time per
minute. Winking Red LED shows temperature value
exceeds limit, while winking Yellow LED shows humidity
