Marmitek DOORPHONE 170, Руководство пользователя

Страница: 16 / 140

© MARMITEK 16
OPERATION
1. Switch on the handset with a long press (over 3 seconds) of the
Power ON/OFF button (15) . Press the same button again in
case you want to switch off the unit.
2. The power indicator (19) will light up blue. In case the Li battery has
run down, the power indicator will start flashing blue. At the same
time, the battery icon shown on the LCD (17) will become empty
and flashing. Place the unit into the charger stand to charge up the
battery. During charging, the segments inside the battery level icon P
will flash in turn irrespective if the unit is switched on or off. To
protect the battery, if the unit is not being re-charged when the icon O
shows up, it will be switched off automatically after 10 minutes.
3. During standby mode, short press of the Talk/answer button /
(16) will initiate the backlight and activated the touch keys
Long touch the menu key
(11) for over 3 sec to enter programming
mode & LCD show following:
GATE VOLUME
This will set the speaker volume of the door unit. Use
the left/right key
(9) (10) to select between the 4
levels with 1 being the lowest and 4 being the highest
volume. Short touch the menu key
(11) to confirm
your setting.
ALARM MODE
This will set the method of alert when a visitor calls,
either with a ding-dong sound or vibration or both. Use
the left/right key
(9) (10) to select between
(ding-dong sound and vibration) or (ding-dong
sound only) or (vibration only). Short touch the menu
key
(11) to confirm.
The corresponding icon will be shown on the top of the LCD (18).
TRIGGER TIME
This is the duration time for how long the door lock is being
triggered. Use the left/right key
(9) (10) to select
between 2, 8, 15, or 30 seconds. Short touch the menu
key
(11) to confirm.