BABYVIEW 725
13
1. Press and hold power button
over 3 seconds on camera. The
power LED (red light) and night light
(orange light) will start blinking. This
will turn on the power of camera and
camera will wait for pairing.
2. Press the Power button to turn on the monitor
and the power LED will light up (green).
3. Go in the submenu
add Camera
on the monitor.
4. Please choose which
number of cameras you
want to add, and then press
the icon
.
5. Pairing is completed, it will
show " " on the monitor.
6. If pairing has failed, it will
show this picture on the monitor.
Note :
Make sure the camera and the monitor are
within range of each other.
If there is out of range, the picture will be displayed on
the LCD screen and the warning sound will be emitted
from the monitor unit if the monitor exceeds the range
(unlink). The warning sound will be emitted from the
monitor until you press any button to stop.