SIDE VIEW
MOUNTING
LOCATION
MINIMUM
DISTANCE
TO WALL
6
1
/
2
in.
(165 mm)
1
/
2
in.,
3
/
4
in. (2)
(12.7 mm, 19.1 mm)
1
3
/
4
in.
(44.5mm)
14 in. (356 mm)
12
1
/
2
in.
(318 mm)
FRONT VIEW
13 in.
(330.2 mm)
12
5
/
8
in.
(321 mm)
Cleaning the Fan and Motor
Remove the protective grille from the rear of the heater. This
provides access to the fan and motor. Wipe off the fan and
motor with a soft cloth or brush. The fan motor does not require
lubrication. Replace protective grille. (See Fig. 9.)
FAN AND MOTOR
PROTECTIVE GRILL
Figure 9
HEATING ELEMENT
Figure 8
USE CARE TO PREVENT DAMAGE TO INTERNAL HEATER
WIRING WHEN CLEANING ELEMENT. MAKE SURE ALL
CONNECTIONS REMAIN TIGHT AND ALL WIRING IS
ROUTED AWAY FROM ELEMENT FINS WHEN REASSEM-
BLING THE UNIT. ALLOWING WIRING TO TOUCH THE ELE-
MENT FINS COULD RESULT IN A FIRE HAZARD.
CAUTION
!
Dimension Data
Mounting Height, ft. (mm)
Min. Distance from
BTU per
Contactor Vertical Installation Horizontal Installation
Horizontal Air
Mounting Hole to
Heater Rating and Voltage
Hr.
Phase
Built-in
Min.
Max.
Min.
Max.
Throw, ft. (mm)
Wall, in (mm)
*5000 W @ 240V
17,065
4165W @ 240V
14,215
1
No
6’
11’
6’
8’
18’
**13”
3332W @ 240V
11,365
(1829)
(3353)
(1829)
(2438)
(5472)
(330)
2500W @ 240V
8,533
*3750W @ 208V
12,799
3123W @ 208V
10,659
1
No
6’
11’
6’
8’
18’
**13”
2500W @ 208V
8,533
(1829)
(3353)
(1829)
(2438)
(5472)
(330)
1874W @ 208V
6,396
*Heater is shipped from factory wired for these wattages. Heater can be field adjusted to the other wattages (Refer to “Adjusting the Heat
Output” on page 4.)
**48" (1219 mm) when heater air flow is between 45° downward and vertical.
SPECIFICATIONS
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted
against defects in workmanship and materials for one year from date of
installation, except heating elements which are warranted against defects
in workmanship and materials for five years from date of installation. This
warranty does not apply to damage from accident, misuse, or alteration;
nor where the connected voltage is more than 5% above the nameplate
voltage; nor to equipment improperly installed or wired or maintained in
violation of the product’s installation instructions. All claims for warranty
work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or
reinstallation of products, including labor costs, and shipping costs
incurred to return products to Marley Engineered Products Service
Center. Within the limitations of this warranty, inoperative units should be
returned to the nearest Marley authorized service center or the Marley
Engineered Products Service Center, and we will repair or replace, at our
option, at no charge to you with return freight paid by Marley. It is agreed
that such repair or replacement is the exclusive remedy available from
Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WAR-
RANTIES EXPRESSED OR IMPLIED. AND ALL IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES
ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREE-
MENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE
FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT
LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or con
sequential damages, so the above exclusion or limitation may not apply
t
o you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley
Engineered Products in Bennettsville, SC, USA, at 1-800-642-4328.
Merchandise returned to the factory must be accompanied by a return
authorization and service identification tag, both available from Marley
Engineered Products. When requesting return authorization, include all
catalog numbers shown on the products.
Part No: 5200-2252-000
SWO 259
05/95
SPX Corporation
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
HOW TO ORDER REPAIR PARTS
In order to obtain any needed repair or replacement parts, warranty service or technical information,
please contact Marley Engineered Products Service Center toll-free by calling 1-800-642-HEAT.
When ordering repair parts, always give the information listed as follows:
1. The Model Number
2. The Part Description
3. Date of Manufacture
