HEATER SELECTION CHART
INSTALLATION OF ELEMENTS
1. Place heater on flat surface and remove both wiring compartment cov-
ers and wire guard.
2. Remove the outside hex nut from both ends of the element.
3. Place the element in the “L” shaped slots in the heater housing.
4. Install ring terminal on factory installed wire assemblies on the thread-
ed studs on both sides of element. See Fig. 1.
5. Replace hex nut and secure
6. Replace wiring compartment covers and wire guard.
APPLICATION LIMITATION AND PRECAUTIONS
•
Hazardous Atmosphere
- These heaters are
not
suitable for use in
hazardous locations.
•
Indoor Use Only
• Ceiling Mount Only
- Do not mount to walls.
•
Maintain at least
5 ft. (1.5 m) in radiant path between bottom of heater
and combustible material.
•
Corrosive Atmospheres
- The high quality finish and steel internal
sheet metal parts will give excellent service under most operation con-
ditions, including coastal salt air and most industrial atmospheres.
However, the finish is not intended for salt spay exposure in marine
applications or highly corrosive greenhouse, swimming pool, chemical
storage or industrial atmospheres.
•
The mounting structure and anchoring hardware
must be capable
of reliably supporting the total weight of the heater and all accessories.
INSTALLATION OF HEATER
1. Cut suspension chain (approved) to desired mounting length.
2. Attach chain to heater with “S” hooks provided. Heater must be
mounted so that element is horizontal.
3. Tilt heater (if desired) by adjusting chains as shown in Fig 2.
Quartz Tube
Ring Terminal
Hex Nut
Fig. 1
Fig. 2
Reflective
Dimensions
Model No.
Volts
Watts
Angle
Height
Width
Length
Wt.
in. (mm)
in. (mm) in. (mm)
lb (kg.)
RR41512A
120
1500
60 (Sym)
3.375 (86) 5.5(140) 46 (1168)
9 (4.1)
RR53024A
240
3000
57 (1448) 11 (5.0)
WARNING
VERIFY THE POWER SUPPLY VOLTAGE COMING INTO THE HEATER MATCH-
ES THE RATING PRINTED ON THE HEATER NAMEPLATE BEFORE ENERGIZ-
ING.
!
G
W
G
RR41512
RR53024
PLUG-TYPE
15 Amperes
125 Volts
NEMA 5-15P
PLUG-TYPE
15 Amperes
250 Volts
NEMA 6-15P
DO NOT HANDLE QUARTZ LAMP OR QUARTZ TUBE HEATING ELEMENTS
WITH BARE HANDS AS SALT IN PERSPIRATION MAY DETERIORATE THE
QUARTZ.
CAUTION
!
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heat-
ing elements which are warranted against defects in workmanship and materials for two years from date of installation. This warranty does not apply to damage from acci-
dent, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in
violation of the productʼs installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products to
Marley Engineered Products Service Center.Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or
the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such
repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS
AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT,
WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the facto-
ry must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization,
include all catalog numbers shown on the products.
5200-2476-002
ECR 38749
04/10
2
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts
1-800-642-4328
2. Purchase Replacement Parts
1-800-654-3545
3. General Product Information
www.marleymep.com
Note:
When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
