FAN AND MOTOR
PROTECTIVE GRILL
Figure 9
Mounting Height, ft. (mm)
Min. Distance from
BTU per
Contactor
Vertical Installation
Horizontal Installation
Horizontal Air
Mounting Hole to
Heater Rating and Voltage
Hr.
Phase
Built-in
Min.
Max.
Min.
Max.
Throw, ft. (mm)
Wall, in (mm)
*5000 W @ 240V
17,065
4165W @ 240V
14,215
1
No
6’
11’
6’
8’
18’
**13”
3332W @ 240V
11,365
(1829)
(3353)
(1829)
(2438)
(5472)
(330)
2500W @ 240V
8,533
*3750W @ 208V
12,799
3123W @ 208V
10,659
1
No
6’
11’
6’
8’
18’
**13”
2500W @ 208V
8,533
(1829)
(3353)
(1829)
(2438)
(5472)
(330)
1874W @ 208V
6,396
*Heater is shipped from factory wired for these wattages. Heater can be field adjusted to the other wattages (Refer to “Adjusting the Heat Output” on page 4.)
**48" (1219 mm) when heater air flow is between 45° downward and vertical.
SPECIFICATIONS
HOW TO ORDER REPAIR PARTS
In order to obtain any needed repair or replacement parts, warranty service
or technical information, please contact Marley Engineered Products Service
Center toll-free by calling 1-800-642-HEAT.
When ordering repair parts, always give the information listed as follows:
1. The Model Number
2. The Part Description
3. Date of Manufacture
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except
heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from
accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or main-
tained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products
to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service cen-
ter or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that
such repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM
THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PROD-
UCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, USA, at 1-800-642-4328. Merchandise returned to
the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return autho-
rization, include all catalog numbers shown on the products.
Part No: 5200-2297-000
SWO 311
07/96
SIDE VIEW
MOUNTING
LOCATION
5
1
/
2
in.
(165 mm)
1
/
2
in.,
3
/
4
in. (2)
(12.7 mm, 19.1 mm)
1
3
/
4
in.
(44.5mm)
14 in. (356 mm)
12
1
/
2
in.
(318 mm)
FRONT VIEW
11
1
/
4
in.
(286 mm)
MINIMUM
DISTANCE
TO WALL
13 in.
(330.2 mm)
Dimension Data
HEATING ELEMENT
Figure 8
SPX Corporation
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
4
