7
programming
Feeder breaker powers the
remote solenoid.
Main circuit breaker powers the
control panel
PROGRAMMING STEPS
Power ON the control panel circuits by
moving the switches on the two circuit
breakers to the up position.
Measure the distance from the bottom of
the ultrasonic sensor to the basin floor.
Access the program by pressing
GOTO SETUP
Press the light blue screen cell under
ENTER PASSWORD bringing up a
yellow keypad then enter password 1492
(factory default password) and press ENT
to access the setup screens.
BOTTOM OF SENSOR
TO BASIN FLOOR
1"
CIRCUIT PROTECTION
➠
