Marley H3, Руководство пользователя

Страница: 2 / 4

FAN SERIAL NO.
FAN BLADE CLAMP FASTENER TIGHTENING INSTRUCTIONS
GENEROUSLY COAT CLAMP BOLT THREADS AND NUT
BEARING SURFACE WITH MARLEY THREAD LUBRICANT
SPX COOLING TECHNOLOGIES, INC. OVERLAND PARK, KS.
71-81-2 PW
TIGHTEN TO FT LB TORQUE
55
96 H3 6 — XXXX
Order No.
FAN SERIAL NO.
FAN BLADE CLAMP FASTENER TIGHTENING INSTRUCTIONS
GENEROUSLY COAT CLAMP BOLT THREADS AND NUT
BEARING SURFACE WITH MARLEY THREAD LUBRICANT
SPX COOLING TECHNOLOGIES, INC. OVERLAND PARK, KS.
71-81-2 PW
TIGHTEN TO FT LB TORQUE
55
96 H3 6 — XXXX
IMPORTANT
A. Each fan is statically balanced at the factory as an assembly. The fan hub is identified with the complete serial number
and each blade socket is identified by number. Each fan blade is marked with the identification portion of the fan serial
number and a sequential number indicating position of the fan blade in the fan hub.
B. Check and, if necessary, retighten blade clamping hardware to prescribed torque prior to startup and subsequently at
6 month intervals.
C. When writing the Marley sales office or representative for repair or replacement parts, please refer to the tower order
number and fan serial number. ConTACT your MArlEy sAlEs rEprEsEnTATivE for AssisTAnCE on ordEr
plACEMEnT.
TYPICAL FAN NAMEPLATE
(noTE: refer to Table for prescribed Torque)
Marley order no.
fan diameter
order no.
final pitch Angle
speed, rpm
Contract hp
Marley
/
H3 Fan
/