manualshive.com logo in svg

Markusson Grindomatic V12, Оригинальное руководство пользователя

Поделиться
Скачать
Markusson Grindomatic V12 Скачать руководство пользователя страница 6

Grindomatic

6 Grindomatic 201708 EN

Safety

2.3 Signs and symbols

See the table below for information about the signs and symbols on The Grindomatic Auto Chain Grinder:

Sign/Symbol

Description

Always wear protective glasses and ear protection when using the machine.

Always wear protective gloves when using the machine.

Warning! A warning tells you about conditions that can cause injury or death, if you do not obey the 

instructions. Do not continue until all conditions are accepted and engaged.

Before you install, operate or do maintenance on the machine, you must read the safety information 

in the User manual. Obey the instructions to prevent injuries or damage to the equipment.

Risk for cutting injuries. Keep fingers away from the area when the machine is on.

Risk for pinching injuries. Keep fingers away from the area when the machine is on.

Содержание Grindomatic V12













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды