The Angle Grinder is now ready for use.
Clamp down the piece of work, if not secured by its own
weight.
Roughing
Move the running grinding wheel at a 30 to 40 degree blade
angle, move the blade angle back and forth across the piece of
work. Applying moderate pressure.
Always use the auxiliary handle (5). It can be attached in 2
positions.
Abrasive cutting
Place the running cutting wheel carefully on the piece of work
and do not tilt or oscillate it.
Do not tilt the cutting wheel to stop it spinning when it is
shutting down.
Never use a grinding wheel for cutting.
You can screw on the auxiliary handle (6) in 3 positions.
The noise that is generated at the workplace can exceed
85db(A).Therefore ear protection must be used.
Warning
Using Handtools can be dangerous. Always
take care and keep away from children. Wear
protection in work area at all times. Select
correct type and size tool for the job in hand.
67099c
