• Check the tool for damages.
• Before using the tool the next time check that the protection devices or slightly damaged parts are
in good working conditions! Check whether the moving parts function correctly, that these are not
jammed or whether any parts are damaged.
• All the parts to be correctly mounted and meet all the requirements for the proper functioning of
the electric tool.
• Damaged protection devices and parts are to be repaired or changed by a qualified technician
provided that the operating instructions do not specify otherwise.
• Damaged switches are to be replaced in a customer service shop! Do not use electric tools that
cannot be switched on or off.
wARNING!
• For your own safety always use only the accessories and attachments specified in the operating
instructions or recommended or specified by the tool manufacturer!
• The use of accessories and attachments other than those specified in the operating instructions
can cause injuries! .
• Always have your tool repaired by certified technicians!
• This tool meets the relevant safety requirements!
• Repairs are to be carried out only by qualified technicians with original spare parts to avoid the
risk of injuries to the user caused by improper repairs!
• Hearing protection: In case of a sound pressure greater than 85.0 dB(A) wear hearing protection to
avoid damage to your hearing!
Special Safety Instructions
• Do not use the machine without the protective cover! Ensure that this is fitted correctly!
• Check whether the mounting flanges and the disk have been inserted correctly and are not
damaged’
• Ensure that the speed of the machine is high enough for the accessories. Allow a newly mounted
abrasive wheel to run without a load for at least thirty seconds! Please keep the safety instructions
in a safe place!
• Please ensure that the voltage of the mains power supply corresponds to that stated on the type
plate. The tool is equipped with a three pin plug!
• Only use a suitable extension cable when this is absolutely necessary! The use of an unsuitable
extension cable carries with it the danger of fire or an electric shock! If an extension cable has to
be used. ensure that it is correctly wired and in good condition!
• Your machine is double insulated. This means that two completely independent types of insulation
prevent you from coming into contact with live metal parts. This measure represents a high degree
of protection against an electric shock.
• When working with this machine it is advisable to use ear protection!
push the switch down. It will then jump back in its original position.
Cleaning and Care
The machine does not require any special maintenance. Regularly clean the
ventilation slots.
• Before cleaning the machine I remove the mains plug from the socket and turn the on and off
switch (1) to position (0) !
• For cleaning purposes, only use a slightly damp but not wet cloth!
• Do not use any abrasive additives (petrol, turpentine etc) as these may damage the plastic
housing!
• Ensure that no moisture is allowed to get inside the machine, After cleaning, wipe the machine
with a dry cloth!
