cleaning and care
• Before cleaning the machine I remove the mains plug from the socket and turn the on and off
switch (1) to position (0) !
• For cleaning purposes, only use a slightly damp but not wet cloth!
• Do not use any abrasive additives (petrol, turpentine etc) as these may damage the plastic
housing!
• A mild soap is suitable for cleaning the machine!
• Ensure that no moisture is allowed to get inside the machine.
• After cleaning, wipe the machine with a dry cloth!
SAFETY INSTRUCTIONS
Warning!
When using electric tools, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury, including the following. Read all these instructions
before attempting to operate this product and save these instructions.
For safe operation:
01. Keep work area clean
- Cluttered areas and benches invite injuries.
02. consider work area environment
- Don’t expose power tools to rain. Don’t use power
tools in damp or wet locations. Keep work area well lit. Don’t use power tools in presence of
flammable liquids or gases.
03. Guard against electric shock
- Prevent body contact with earth surfaces (e.g. pipes,
radiators, ranges refrigerators)
04. Keep children away
- Do not let visitors contact tool or extension cord. All visitors should
be kept away from work area.
05. Store idle Tools
- When not is use, tools should be stored in dry, high, or locked-up place,
out of the reach of children.
06. Don’t force tool
- It will do the job better and safer at the rate for which it was intended.
07. Use the right tool
- Don’t force small tools or attachments to do the job of heavy duty tool.
Don’t use tools for purposes not intended for example, don’t use circular saw for cutting tree
limbs or logs.
08. Dress properly
- Do not wear loose clothing or jewellery. They can be caught in moving
parts. Rubber gloves and nonskid footwear are recommended when working outdoors. Wear
protective hair covering to contain long hair.
09. Use safety glasses
- Also use face or dust mask if cutting operation is dusty.
10. Do not abuse the cord
- Never Carry tool by cord or yank it to disconnect it from
receptacle, Keep cord from heat, oil and sharp edges.
11. Secure work
- Use clamps or a vice to hold work, it’s safer than using your hand and it frees
both hands to operate tool.
12. Do not overreach
- Keep proper footing and balance at all times.
13. Maintain tools with care
- Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords periodically
and if damaged, have repaired by authorised service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry, clean and free from oil and grease.
14. Disconnect tools
- When not in use, before servicing, and when changing accessories such
as blades, bits and cutters.
15. Remove adjusting keys and wrenches
- Form the habit of checking to see that keys
