Marks & Spencer Telephones, Инструкция по эксплуатации

Страница: 18 / 26

1
8.1.6 Turn on or off the auto answer
1. Repeat steps 1 to 2 in section 8.1.1
2. Press <OK> and <UP/DOWN> to select Auto Answer .
3. Press <OK> and <LEFT/RIGHT> to turn on or off the Auto Answer feature.
4. Press <OK> to confirm.
8.1.7
Register an additional handset
You can register up to 5 handsets per base station.
1. Repeat steps 1 to 2 in section 8.1.1
2. Press <OK> and <UP/DOWN> to select Register.
3. Press <OK> and <LEFT/RIGHT> to select the desired base station that you want your handset
4. Press <OK> to enter the 4-digit system PIN.
Note: 4-digit PIN is entered in**** . Once 4 digits are entered, the right soft key will become OK.
5. Press and hold <PAGE> on the base station until the Base emit a beep and IN-USE LED flash.
6. Press <OK> on the handset to confirm.
Note: “
Registering…”
will display. A beep tone is emitted from the handset to indicate successful
registration and the screen returns to idle mode.
If the base is found and the PIN is correct, an unused handset number will be assigned
automatically.
If the PIN is incorrect,
“Incorrect PIN”
will display with an error tone, and the handset returns
If no base is found within a certain period,
“No Base Found”
will display with an error tone, and
the handset returns to idle..
8.1.8 De-Register
a handset
1. Repeat steps 1 to 2 in section 8.1.1
2. Press <OK> and <UP/DOWN> to select De-register.
3. Press <OK> to enter the 4-digit System PIN .
Note: 4-digit PIN is entered in . Once 4 digits are entered, the right soft key will become OK.
4. Press <OK> and <LEFT/RIGHT> to select the handset that you want to de-register.
5. Press <OK> to de-register the handset.
“De-registered”
will display and go back to idle.
8.1.9 Restore the handset to default settings
1. Repeat steps 1 to 2 in section 8.1.1
2. Press <OK> and <UP/DOWN> to select Handset Reset.
3. Press < OK> and <YES> to confirm resetting the handset to default settings.
Note: Phonebook and speed dial entries will not be deleted after handset reset.
8.2 Base Settings
8.2.1 Set the base ringer
In Idle:
1. Press <Menu> and <UP/DOWN> to select Settings .
2. Press <OK> and <UP/DOWN> to select Base Settings .
3. Press <OK> and <UP/DOWN> to select Ringer .
4. Press <OK> and <LEFT/RIGHT> to select your desired melody for your base ringer. (A total of
five melodies for base ringer are provided.)
5. Press < DOWN> and <LEFT/RIGHT> to select your desired ringer volume from Level 1 to
Level 5 or Off .
6. Press <OK> to confirm.
to register to.
to idle.
.
.
.
.
****
5
6.