marklin Central Station 60215 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 36

marklin Central Station 60215 Скачать руководство пользователя страница 31

67

Switch to the processing mode.

Possible Settings for the Central Station

This Central Station is activated
as the main controller.
This Central Station is being used

as a second or auxiliary controller.
The Central Station can be used

alone or in conjunction with several
Central Stations. When you are using
several Central Stations, one must be
used as the main controller and the
others may only be used as auxiliary
controllers.

Setup allows you to adjust the reproduction of data, backup of data, update, reboot, shut down, calibrating, and settings for the Central Station.

Setup

Here, you can connect the Central
Station to a computer network.
More information about this
can be found with our help “?“.

This menu can be used to adapt the Central
Station to your personal needs.
For example: speed indicator, status inquiry,
mouse pointer, function icon color, and
language.

After you have stored the setting in memory as a 2nd or auxiliary controller, you can determine
here whether the two controllers are supposed to be synchronized with the master Central Station.
You do this by calling up the menu “CS“ here. After you have determined whether synchronization
has to be done or not, store the setting again in memory.
If the Master/Slave connection is broken and the CS is deactivated as a 2nd or auxiliary controller,
the original data for the CS will be present again.

Aux

60173

USB

Sx

B 0

prog

B 0

B 0

B 0

power

Aux

60173

USB

Sx

B 0

prog

B 0

B 0

B 0

power

2nd Central Station

The locomotive list must be set up again in the 2nd Central Station.

1st Central Station

60123 Slave cable (Not included with a Central Station).

«
...
29
30
31
32
33
...
»

Содержание Central Station 60215





































Отзывы:

Нет отзывов