4 Programming the timeout
It is important that damaged device elements such as connecting cable, switch, sealing collar or heating tube must be replaced. The
infrared heater must be dismantled immediately and stored in a dry place. Repairs (replacing a defective connecting cable, a defective
heating tube or similar) must only be carried out by the manufacturer.
Heating tubes are sensitive to direct skin contact (do not touch with your fingers). Grease or other contamination can be cleaned with a
cloth soaked in alcohol.
specialist dealer.
any detergents). Never immerse the infrared heater in or spray with liquids.
An eventual discolouration of the protective grating due to heat exposure results from normal physical processes and does not
constitute a defect.
Switch on the infrared heater only when all cable connections have been established completely.
The heating tube must be protected from mechanical stress. Is must be replaced when changes (dark spots, deformations) become
visible or if the nominal service life has been reached.
Important NOTE:
Place the infrared heater on a level surface and connect to the mains supply.
Activating the programming:
Press the device button for 5 seconds until you hear a long signal tone (2 sec.).
Programming the timeout:
30 min
First double click
ˋ
30 minutes operating time
ˋ
2 Signal tones
60 min
Second double click
ˋ
60 minutes operating time
ˋ
3 Signal tones
90 min
Third double click
ˋ
90 minutes operating time
ˋ
4 Signal tones
no
Fourth double click
ˋ
no timeout
ˋ
1 Signal tone
Completion of programming:
Press the device button for 5 seconds until you hear a long signal tone (2 sec.).
5 Repair / maintenance and cleaning
The factory state is without timeout for upright operation.
NOTE:
If you hear three short signal tones in sequence, the upright operating position must be re-programmed by pressing again (2 sec.) and
releasing the device button. You will hear a long signal tone (2 sec.).
t
t
a
w
0
0
4
1
t
i
n
u
t
h
g
i
r
p
u
r
e
t
a
e
h
d
e
r
a
r
f
n
i
x
u
li
k
r
a
m
INFORMATION
