Version 24.11.2016
O-301-R
Vehicle with MIB Composition Media und MIB MMI Navigation
1. On RCD510 ensure that there is a 26pin connector on the rear
2. Locate OBD-port and remove cover
3. Turn on ignition (pos. 2)
4. Wait until the head-unit has booted
5. Plug coder into OBD-port
6. Leave coder for about 30 seconds in OBD-port
7. Remove coder from the OBD-port
To reverse the coding repeat steps 2.-7.
Note:
After the first use on a vehicle, the coder O-301-R is personalized to this vehicle (head-
unit) and can be used unlimited times to code or reverse coding on this vehicle.
Rear-view camera video connection
Vehicle with RNS315/Amundsen, RCD510 and RNS510/Columbus
The video interface "RL-MFD3" is additionally required for these systems (available
seperately).
Vehicle with MIB Composition Media und MIB MMI Navigation
The video cable included in the set is connected to the MIB Quadlock connector:
Cable colour
Assignment
●
/
●
/
●
Colored (video)
Chamber B - Pin 6
●
Black (ground)
Chamber B - Pin 12
