Market Forge Industries R-1600E, Руководство пользователя

Страница: 2 / 6

TABLE OF CONTENTS
1
INSTALLATION
INSTALLATION ........................................................1
SERVICE CONNECTIONS ......................................2
DIMENSIONS & SERVICE CONNECTIONS ..........2
OPERATION
OPERATING INSTRUCTIONS ................................3
THERMOSTAT SETTINGS ......................................3
MAINTENANCE
PERIODIC CLEANING ............................................3
ADJUSTMENTS ......................................................3
ILLUSTRATED PARTS LIST
ELECTRIC SKILLET EXPLODED VIEW .................4
ELECTRIC SKILLET PARTS LIST ..........................5
INSTALLATION
INSTALLATION:
Position unit on counter allowing sufficient rear clear -
ance from wall to tilt freely and completely without
obstruction.
Mark four corner locations of unit base, as shown in
figure 1.
Remove unit from counter and locate position of four
holes as per figure 1.
Apply a continuous bead of silastic or other equiva-
lent sealant along the complete perimeter edge of the
unit base.
Use 5/16-18 hex cap screws with suitable flat wash -
ers to bolt down. Screw length must be 1 1/4” long
plus counter top thickness.
Wipe off excess sealant.
A control box with power supply equivalent to electri-
cal rating of appliance should be located conveniently
1.
2.
3.
4.
5.
6.
7.
nearby.
A waterproof electrical connection for power supply to
console housing must be provided.
Ground unit to terminal provided inside console hous-
ing.
Turn power on and check for proper operation.
Figure 1
8.
9.
10.