manualshive.com logo in svg

Market Forge Industries M24E42, Руководство пользователя, Страница: 6 / 27

Поделиться
Скачать
Market Forge Industries M24E42 Скачать руководство пользователя страница 6

Operating Instructions 

MARKET FORGE MODULAR STEAM GENERATOR OPERATING INSTRUCTIONS

 

WARNING:

 The installation of this appliance is to be in accordance with the current CAN 1-B149. 1 of CAN1-

B149.2 - Installation Code for Gas Burning Appliances and Equipment and/or Local Codes.

 

WARNING:

 All Electrical connections are to be made in accordance with CSA C22.1 Canadian Electrical Code 

Part 1 and/or Local Codes.

 

Market Forge has two types of steam generators; one has an automatic drain, the other a manual one. To determine which 
you have, open cabinet doors and you will see a control box with  2 switches and an indicator light. Instruction label on the 
control box will identify the steam generator as being

 automatic

 or

 manual.

 

DAILY OPERATING, SHUT DOWN & CLEANING INSTRUCTIONS FOR 

AUTOMATIC STEAM GENERATORS

 

First check to be sure that: 

A.  WATER switch is in the off position. 

           B.  WATER supply valve is OPEN. 

C.  ELECTRICITY is connected. 

           D. That STEAM is turned on. 

E.  Proceed with daily operating procedure. 

DAILY OPERATING PROCEDURE 

STEP 1   Flip WATER switch from OFF to ON.  

STEP 2   Wait 6 minutes for water to fill in steam generator. 

 (Gauge glass should indicate approx.  2/3 full.)  

STEP 3   Flip heat switch from ON to OFF and release back to ON. Indicator 

light will come on immediately (This is necessary to manually reset 
the unit.) This also turns on HEAT. 

DAILY SHUT-DOWN AND CLEANING 

STEP 1   Flip WATER switch OFF. (Indicator light will go out and 

steam generator will automatically drain.)  

STEP 2   After steam generator has completely drained, repeat Steps  1 & 2. 

Water is to remain in steam generator until next day use.  

STEP 3  Repeat Steps  1 & 2. 

Water is to remain in steam generator until next day use

 

NOTES:

 If generator is not to be in use for extended periods, (2-3 mos.) contact your authorized 

service dealer, for it must be cleaned and drained completely. Then add PM-Plus as per 
instructions on Bottle.

 

If steam generator does not automatically drain when water switch is shut off, open manual 
drain by turning knob counter clockwise. Electric steam generators should be blown-down 
and refilled after every 4 hours of operation. 

 

Содержание M24E42




























Отзывы:

Нет отзывов