14
MAINTENANCE
Preventative Maintenance
INNER DOOR REMOVAL & CLEANING
The door assembly includes an outer door with mounted
hand wheel and an inner door with sealing gasket. The in-
ner door parts should be cleaned weekly to ensure proper
sealing against compartment opening.
1. With door opened and hand wheel turned to full
clockwise position, grasp tabs and lift inner door up
and away from door.
Wash inner doors, gaskets and inside of outer door with
mild detergent, rinse and reassemble.
DOOR WHEEL LUBRICATION
The door wheel includes the externally mounted wheel
and built-in screw mechanism. Rotation of the door wheel
should be checked monthly for ease of motion. If the
wheel grinds or is difficult to turn, the screw should be
lubricated with graphite followed by rotation of the wheel
to transfer lubricant into threads in door.
REPLACING WORN OR DAMAGED DOOR GASKET
Remove the screws from the gasket of the inner door. Slip
out the old gasket. Clean the face of the inner door and
the gasket plate. Place the new gasket and gasket plate
in position and fasten the screws through the assembly
as illustrated below. Tighten the screws enough to make
a firm seal. It is recommended that a spare gasket be kept
on hand in event of an emergency. Replacement gaskets
may be obtained for your model by requesting MODEL
“A” DOOR GASKET #10-0433. Include the serial number
of your steam cooker with your order when ordering parts.
Figure 6
