Markes International ACTI-VOC Скачать руководство пользователя страница 3

 

 

w
w
w
.m
a

r

k

e

s

.c

o

m
 

Introduction 

1.1  Notices 

This manual was prepared exclusively for the owner of the Markes International ACTI-VOC Low-flow pump. The 
material within this manual is proprietary information and is to be used only to understand, operate, and 
maintain the instrument. By receiving this document, the recipient agrees that neither this document nor the 
information disclosed within nor any part thereof shall be reproduced or transferred, physically, electronically or 
in any other form, or used or disclosed to others for manufacturing or for any other purpose except as 
specifically authorised in writing by the manufacturer. 

1.2  Disclaimer 

The seller assumes no responsibility whatsoever, to any party whosoever, for any property damage, personal 
injury, or death received by or resulting from, in whole, or in part, the improper use, installation, or storage of this 
product by the user, person, firm, entity, corporation or party not adhering to the instructions and warnings in 
this manual, or otherwise provided by the seller or from not adhering to all federal, state, and local 
environmental and occupational health and safety laws and regulations. 

The seller shall not be liable for direct, indirect, consequential, incidental or other damages resulting from the 
sale and use of any goods and sellers’ liability hereunder shall be limited to repair or replacement of any goods 
found defective. This warranty is in lieu of all other warranties, expressed or implied, including but not limited to 
the implied warranties of merchantability and fitness for use or for a particular purpose which are expressly 
disclaimed. 

1.3  Warnings 

READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE 

 

Failure to read, understand, and comply with ALL accompanying literature, product labels, and warnings 
could result in property damage, severe personal injury, or death. 

 

Read and understand ALL applicable environmental health and safety laws and regulations. Ensure 
complete compliance with ALL applicable laws and regulations before and during use of this product. 

 

DO NOT

 remove, cover, or alter any label or tag on this product, its accessories, or related products. 

 

UNDER NO CIRCUMSTANCES

 should this product be used except by qualified, trained, technically 

competent personnel. 

 

DO NOT

 operate this product should it malfunction, require repair, or have a cracked or broken case. 

DO NOT

 repair or modify this product, except as specified in this manual. No user-serviceable parts are 

located within the case. Contact Markes International for service-related queries. 

 

Use only specified Markes parts when performing maintenance procedures described in this manual. 
Intrinsic safety certifications become void by substitution of components, unauthorised repair or 
alteration. 

 

This product is intended for both indoor and outdoor use when protected from splashed or wind-blown 
liquids. The unit is not waterproof, so 

NEVER

 submerge the unit in water. Pump failure or faulting may 

result. 

 

This product presents a possible static hazard. Do not rub the product with a dry cloth. 

 

DO NOT

 charge the battery in an explosive atmosphere. 

 

This product uses rechargeable nickel-metal-hydride batteries, which should always be fully charged 
before use. Use only the battery pack and chargers specified in this manual. 

DO NOT

 insert any foreign 

objects into the contact slot. Shorting contacts will blow the protective fuse. 

 

If the equipment is likely to come into contact with aggressive substances, then it is the responsibility of 
the user to take suitable precautions that prevent it from being adversely affected. Examples of 

Содержание ACTI-VOC















Отзывы: