Markem Imaje SmartDate X40, Инструкция по эксплуатации

Страница: 4 / 28

Instruction manual
Safety instructions
4
Because Markem-Imaje equipment is tested with Markem-Imaje
consumables and spare parts for conformity with certain regulations
and safety standards, use of non-Markem-Imaje consumables
and spare parts also may be inconsistent with testing conditions
and affect compliance of the equipment with certain standards.
The user shall bear all risks associated with use of unsuitable
consumables and spare parts.
Markem-Imaje cannot guarantee the safety and / or suitability of
non-Markem-Imaje print ribbon. The NTRL certification may be
compromised if non Markem-Imaje ribbon is used.
If non-Markem-Imaje ribbon is used, it is recommended that anti
static properties be considered.
This equipment is certified in accordance with the requirements
for CE marking.
■ Handling
When removing the printer from the host machine, care should be
taken to first ensure that the body of the printer is at a temperature
that can be comfortably handled. It is important to note that
the small area of the perimeter of the printer main plate which
is exposed between the front and rear covers is likely to be the
warmest zone, and warrants particular attention.
Safety shoes should be worn when installing or removing the
Controller or Printer body from packaging machinery.
These units are heavy and there is a danger of injury if dropped.
To avoid injury by dropping the printer cassette when changing
ribbon, please ensure that the cassette is placed on a bench and
that safety shoes are worn.
Printer weight: - 7.82 kg
Controller weight: 4.52 kg