9. LITTLE MARK TUBE / LITTLE MARK TUBE 800 TECHNICAL DETAILS
INPUTS
INPUT 1
impedance: 500 Kohm, max. voltage: 15 Vpp
INPUT 2
balanced XLR, impedance: 500 Kohm, max. voltage: 15 Vpp
RETURN EFFECT
impedance: 33 Kohm, max. voltage: 10 Vpp
CONTROLS
GAIN 1
–60 dB to +23 dB range
GAIN 2
–60 dB to +23 dB range
LINE OUT
level control on front panel
PRE/POST EQ (for line out)
switch on rear panel
GROUND LIFT
switch on rear panel
MUTE
pulling out the Master knob
MASTER VOLUME
EQUALIZATION
LOW
center frequency: 40 Hz; level: ±16 dB
MID LOW
center frequency: 360 Hz; level: ±16 dB
MID HIGH
center frequency: 800 Hz; level: ±16 dB
HIGH
center frequency: 10 kHz; level: ±16 dB
VLE (Vintage Loudspeaker Emulator)
max. range cut: 250 Hz – 20 kHz
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
OUTPUTS
SEND EFFECT
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
LINE OUT
balanced XLR, max. voltage 20 Vpp
SPEAKER OUT
speakon/1/4” combo, 1/4”
OTHER
HEIGHT
2 rack units (3.16 in. / 80.3 mm)
WIDTH
10.87 in. / 27.6 cm (19 in. / 48.3 cm with rack ears)
DEPTH
10.04 in. / 25.5 cm
WEIGHT
6.55 lbs / 2.97 kg (LITTLE MARK TUBE)
6.31 lbs / 2.86 kg (LITTLE MARK TUBE 800)
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
(LITTLE
MARK
TUBE)
450W RMS @ 8 ohm, 750W RMS @ 4 ohm
(LITTLE
MARK
TUBE
800)
POWER REQUIREMENT
100V; 120V; 230V; 240V 50/60Hz
(Voltage is factory preset according to
region
of
sale).
Markbass amps/combos are manufactured
to be sold and used in the country of
purchase, and are factory preset to that
country’s
voltage.
Due to homologation issues, the voltage
may
not
be
changed.
FUSE
LITTLE MARK TUBE:
EUROPE
4 A 250V T 5x20
AUSTRALIA/UK
4 A 250V T 5x20
USA/CANADA
8 A 250V T 5x20
JAPAN
10 A 250VT 5x20
LITTLE MARK TUBE 800:
EUROPE
6.3 A 250V T 5x20
AUSTRALIA/UK
6.3 A 250V T 5x20
USA/CANADA
8 A 250V T 5x20
JAPAN
10 A 250VT 5x20
07
