Mark optitherm 06 29 191, Техническое руководство

Страница: 19 / 152

EN
19
• With the
 and  button, select Language and then push the
OK
button
• With the

and

button, select the desired language and confirm this with the
OK
button. In
the middle of the top of the screen the chosen language is shown and the display also appears in
that language.
•
When you have finished with the changes you leave the menu item by pressing the ESC button
and you go back to the settings menu.
• Now select another item to change or to go back to the user menu by pushing the
ESC but-
ton. Push the ESC button again to go back to the main display.
5.13 Settings menu: Switch on/off Summer / winter time
The OptiTherm has an automatic summer/wintertime conversion. When this is not desired, it can
be switched off here.
Follow the image below to change it.
• In the settings menu select Summer/winter time and then push the
OK button.
• Select status by pushing the
OK button
• With the
 and  button, change the setting on/off and confirm this with the OK button.
• Quit summer/winter time by pushing the
ESC button The display now goes back to the set-
tings menu.
• Now select another item to change or go back to the user menu by pushing the
ESC button.
Push the ESC button again to go back to the main display.
5.14 Settings menu: Info
In this menu-item you can read the software version and if applicable the measured value of the
external temperature sensor.
OK OK
ESC ESC ESC
back to main screen
select select modify
Setting
Calibrate
Language
Summer/wintertime
Select Temperature sensor
Information
2x
Summer/wintertime
State Automatic
Summer/wintertime
State Automatic
OK
ESC ESC
select
Setting
Language
Summer/wintertime
Information
Calibrate
PIN
2x
Information
Software version 1.0 [xxxxxxxx]
Outside temperature __,_ °C
back to main screen