3.0 General safety guidelines
1. This device is only to be used indoors.
2. Before every use, check that the voltage on the socket to be used matches the voltage indicated on
the device’s specification plate: 220-240V / 50Hz.
3. Check fan and cable for damage before use. If you discover any damage (even if this is found later,
after a fall for example) or if the device fails to operate properly, do not use and ask a supplier/
trained electrician to repair it. Never open up the device, remove components/screws or carry out
repairs yourself!
4. The distance between the fan blades and the floor must be at least 230cm. The connection point, to
which the fan is connected, must be able to bear a weight of 100kg. Never hang the fan on the
connection point itself; connect it to the ceiling.
5. The electrical installation and wiring must comply with national and local regulations.
6. The fan must be earthed correctly in order to avoid the risk of electric shocks.
7. Never touch a device that is rotating and never insert any part of your body between the rotating
turbines!
8. Never hang the fan in a damp or wet room. Never touch the operating unit with wet hands!
9. Do not leave a fan operating unsupervised in a room.
10. Never hang things over the device. Ensure that curtains, clothing etc do not come into the vicinity of
the fan.
11. Never spray any products (anti-insect, cleaning agent etc) on or in the fan.
12. Do not store or use the fan near acids, alkalis, oil or other corrosive substances.
13. Do not store or use the fan near flammable, explosive or gaseous substances;
14. This device is not suitable to be used by children or persons with a physical, sensual or mental
disability or those who lack experience and knowledge, irrespective of whether they are being \
supervised or there is a responsible person present. Keep these persons and household pets out of
the vicinity of the fan.
15. This device should only be used for the purposes set out in the booklet. Any other usage may be
dangerous (could cause fire, injury, damage, electric shock etc) and will invalidate the liability of the
supplier and the garantee.
4.0 Diagram of components
1
Motor casing
2
Fan turbine
3 Connection bracket
4
Upper protective cap
5
Operating unit
4
