Mark Levinson 38S, Руководство по эксплуатации

Страница: 31 / 38

31
Linked Functions
The Nº38S has the ability to “link” several of its functions to certain
compatible Mark Levinson components (such as the Nº30 and Nº35
digital processors and the Nº31 CD transport).
Note: to take advantage of linked functions, you must connect
the Nº38S to the other, compatible Mark Levinson components
via their communication ports. (See “Rear Panel” and “Set-up
and Installation.”)
There are four linked functions in the Nº38S:
■
Display Intensity: adjusting the Display Intensity on any
Linked component will adjust the displays in the other
Linked components as well, keeping them all at a
consistent brightness level.
■
Standby Link: placing the Nº38S into Standby will also place
the compatible Mark Levinson digital processor and
transport into Standby, except during a digital recording
session (see Record Link section, below). Placing either
digital component into Standby will have no effect on the
Nº38S, since you might well wish to continue listening to a
different source component. Taking a Linked Mark Levinson
digital processor out of Standby will also cause the Nº38S to
come out of Standby (and select the appropriate input—
see Input Selection, below).
■
Input Selection: Placing your Mark Levinson transport in Play
will activate both the corresponding Mark Levinson digital
processor and the Nº38S if either or both is in Standby. In
addition, the appropriate inputs will be selected on the
digital processor and on the Nº38S (specifically, the input
which has an alias of either “No30” or “No35”). Similarly,
activating a Linked Mark Levinson digital processor will
select the appropriate input on the Nº38S (should you be
using the processor with an unlinked DAT machine, for
example).
■
Record Link: placing the Nº38S into Standby while your
Mark Levinson digital audio processor is in Record mode
and the Nº31 transport is in Record Link mode will cause a
warning to be displayed on the digital component. Both
digital components will be prevented from going into
Standby without explicit confirmation at those components
that this is what you desire. In this way, inadvertent
interruption of a digital recording in process can be
avoided.
Display Intensity
Standby Link
Record Link
Input Selection