Mark Audio ERGO SYSTEM, Руководство пользователя, Страница: 9 / 20

8
1. Put the 802 on the floor
vertically or horizontally;
2 . Screw the rod of the
AC
/
SPEAKER POLE on the 802 and
insert the first module on the top;
3.
Use the ‘long’ jack cable to connect the
‘Power Out 1” of the 802 subwoofer
to the first module input;
4. If you have system 2 or system 4 , take the second, the third and the
fourth modules and fix them on the top of the first one through the equipped
junctions (pivot) with the angle you prefer;
INSTALLATION
AC
/
LONG CABLE
5. Take 1 or 3 ‘short’ jack cables
and link the each module
with the close one as shown in the
table;
AC
/ SHORT CABLE
6. Put 1 jack cap to the uncovered output
of last module;
8.
Link the power cord and turn on your
system.
7. Use the “Velcro band” to link long
cables;”
JACK CAP
STRAP CABLE