© 2017 Mark 7® Reloading
This document is proprietary and confidential.
3.
Plug in the Sensor into Port #3 and power on the console which will automatically turn
on the laser. When you first power on the sensor look at the mirror to see where the
laser beam is directed. Use a thick white card/flat object to help find the exact position if
it’s difficult to detect the position.
**Please do not look directly into laser beam or directly at reflection in mirror**
WARNING
– Class 3R laser: Avoid eye contact at all times; do not look directly
into the laser when adjusting the laser alignment.
4.
Adjust Laser beam onto the mirror with the 2X 6-32
” set screws on the top of the
assembly with a Torx screwdriver size T6 x 40mm. Once the Laser diode is hitting the
mirror surface r
otate the mirror using a 3/8” wrench so the laser beam is reflected back
to the sensor main body. Once the reflected laser beam appears on the sensor main
body, continue adjusting the set screws a little at a time to direct the laser beam into the
sensor hole as shown in Figure 7.
Figure 7: Adjusting Laser
Sensor hole